The sulfur dioxide scavenger is a white or red, pure solid crystal. It can safely and efficiently remove harmful substances such as sulfur dioxide remaining in foods and articles, and its value is greatly reduced, even reaching the national standard.
Chlorine dioxide can reduce the sulfur dioxide content in the product from 1000mg/kg to below 20mg/kg, even zero!
Good performance and quality guarantee the safety of sulfur dioxide scavengers. It will not harm the health of users and consumers, and it will also avoid the trouble that products do not meet the requirements of national food hygiene regulations.
[Scope of application]
Suitable for post-blown treatment of bamboo shoots, radishes, ground rings, edible fungi, daylilies, konjac, candied fruit, raisins, preserved fruits, rice flour, yuba, wooden chopsticks, bamboo chopsticks, medicinal materials, aquatic products and other agricultural and sideline products. . This product can effectively remove residual sulfur dioxide such as sulfur dioxide produced by using sodium metabisulfite, sodium sulfite, sodium thiosulfate and the like as a bleaching agent.
【Instructions】
After the product has been color treated with sulfite, rinse with water and then use this product. This product should be diluted with water before use.
1. Dilute the product with 10-30 times of water, then soak the items to be treated in the dilution for 15-30 minutes, then remove. This dilution can be reused 7 times.
2. This product can also be diluted with 200-300 times of water, and the items to be treated are placed in it for about 2 hours. This dilution can only be used once.
3. If the residual amount of SO2 is less than 2000 mg/kg, the dilution factor in the method (1) can be increased to 30-50 times; in the method (2), the dilution factor can be increased to 300-500 times.
Remarks: The value of the dilution ratio is based on the recommended amount of experience. The user can use it as a reference during the actual use. The specific value should be determined according to the residual amount of sulfur dioxide in the product, the required standard, and the quality of the product. In general, the higher the concentration of the scavenger, the stronger the ability to remove and bleach and change color.
[The following models of chlorine dioxide are suitable for use in the removal of sulfur dioxide]
1, food grade disinfectant high purity chlorine dioxide clo2
You can take a picture directly in the following connection:
https://detail.1688.com/offer/44646106508.html?spm=a2615.7691456.0.0.3e48edcckTFPuR
2, food disinfectant stable chlorine dioxide clo2 solution 5%
You can take a picture directly in the following connection:
https://detail.1688.com/offer/44125488463.html?spm=a2615.7691456.0.0.3e48edcckTFPuR
3, one yuan chlorine dioxide disinfection powder
You can take a picture directly in the following connection:
https://detail.1688.com/offer/569724310804.html?spm=a26286.8251493.0.0.221425b2krhiiU
